Blog

Why does my Sillcock leak?

How does a Sillcock work?

AKA “Sillcock”. It works by shutting off the water inside your home and allowing the water to run out of the actual faucet so that there is nothing to freeze. Years ago before these things were invented, we would just shut the water off inside the home which supplied that faucet under the house, and drain the line.Jan 10, 2013

Why does my Sillcock leak?

If a sillcock leaks when the water is on, you are in luck, as the fix is relatively easy. This leak is caused by a loose packing nut. To tighten it, remove the handle by removing the screw. ... When you turn the knob on the sillcock to turn off the water, you are actually closing a valve twelve inches inside the house.Sep 22, 2011

What is the difference between a Sillcock and a hose bib?

The Hose Bib and Its Aliases

Sillcock, spigot, outdoor faucet, hydrant or hose bib are all different names for the same thing. ... To further protect the home a shut off valve may be installed just inside of the house where the hose bib exits the wall. This allows the hose bib to be “drained down” before the first freeze.
Apr 8, 2010

Why does my frost free hose bib leak?

If the faucet leaks from around the handle just when the water is turned on, the stem packing may be leaking. In some cases, you can fix this by simply tightening the retaining nut that's under the handle. ... On frost-proof faucets, the washer is located on the end of the long faucet stem.

Related

How do I know if my hose bib is soldered?

You can tell if a hose bib or outdoor faucet is soldered by checking the connection to the metal pipe. If it is a permanent connection and not threaded where you simply unscrew if you want to remove, then you have a soldered hose bib.Apr 22, 2021

Related

What does a Sillcock look like?

Sillcocks are nothing more than spigots that you'll find coming out of your house. They essentially have a spout in which to connect hoses to or just access tap water while outside. They are sometimes referred to as a hose bib, but that may not be a term everyone is immediately familiar with.Sep 6, 2018

Related

How much does it cost to replace a Sillcock?

Replacing a hose bib, also called a spigot or sillcock, averages $175, or between $100 and $300. New installation raises the price to $200 to $500 depending on the spigot's proximity to existing plumbing.

Related

Why is my outside spigot leaking?

Outdoor spigot leaks are often due to worn-out washers. Besides wear and tear of the washers and packing around the handle, other causes of outdoor faucet leaks can include damaged, frozen or clogged pipes. Pipes can become clogged over time due to mineral deposits and other buildup.Feb 13, 2021

Related

Do plumbers fix outside faucets?

Replacing and installing an outdoor faucet is not just a quick handyperson job. It's a good idea to hire a licensed, bonded and insured plumber for the work, which should only take a few hours unless there are unseen problems.Sep 29, 2021

Related

What is a bib in plumbing?

Hose bibs are outdoor faucets that carry water from your indoor systems outside. Commonly found on the side of your home, a hose bib allows you to attach a hose to direct water where you need it most, often for such activities as watering plants and washing cars.May 18, 2016

Related

Do I have a frost free hose bib?

To know for sure whether a faucet is frost-free or not, look up inside the spout. On a frost-free faucet, all you'll be able to see is a metal stem. On a faucet that isn't frost free, you'll be able to see the valve components open and close when the handle is turned.Jan 31, 2014

Related

What is a frost proof Sillcock?

A frost-free hose sillcock or hose bib has a stem that is 6 to 12 inches long. It prevents cold weather from freezing your pipes because the stem washer & seat valve reside inside your house. As an added benefit the anti-siphon stops water or other liquids from being siphoned back into your water supply.

Related

What is a sillcock faucet?

  • A sillcock is a compression faucet attached to the outside of the house. Repair a leaky sillcock by replacing the stem washer and the O-ring.

Related

How do you repair a leaking sillcock?

  • Repair a leaky sillcock by replacing the stem washer and the O-ring. Sillcocks can be damaged by frost in the winter, according to the Concord plumbing specialists, leaving the homeowner with a ruptured pipe.

Related

Where can I get free shipping on Sillcocks?

  • Get free shipping on qualified Sillcocks or Buy Online Pick Up in Store today in the Plumbing Department. #1 Home Improvement Retailer Store Finder Truck & Tool Rental For the Pro

Related

What are the different valves for the Sillcocks connection?

  • Valves Sillcocks Connection MIP x Sweat (72) Sweat x Sweat (61) Press Fit (49) MIP x FIP (46) PEX Barb x Comp (25)

Related

What is a sillcock faucet?What is a sillcock faucet?

A sillcock is a compression faucet attached to the outside of the house. Repair a leaky sillcock by replacing the stem washer and the O-ring.

Related

How do you repair a leaking sillcock?How do you repair a leaking sillcock?

Repair a leaky sillcock by replacing the stem washer and the O-ring. Sillcocks can be damaged by frost in the winter, according to the Concord plumbing specialists, leaving the homeowner with a ruptured pipe.

Related

Where can I get free shipping on Sillcocks?Where can I get free shipping on Sillcocks?

Get free shipping on qualified Sillcocks or Buy Online Pick Up in Store today in the Plumbing Department. #1 Home Improvement Retailer Store Finder Truck & Tool Rental For the Pro

Related

What are the different valves for the Sillcocks connection?What are the different valves for the Sillcocks connection?

Valves Sillcocks Connection MIP x Sweat (72) Sweat x Sweat (61) Press Fit (49) MIP x FIP (46) PEX Barb x Comp (25)

Related

How much does it cost to replace anti-siphon valve?

The device itself ranges from $35 to $600, while professional labor costs between $100 and $400. Expect to pay between $70 and $250 for a backwater or check valve, including install.

Related

How do you replace a faucet valve?

  • Shut off the circuit breakers to an electric water heater. Then open a faucet on the lowest level of your house and another faucet on an upper level to drain the pipes. Then disconnect the supply tube from the shutoff valve. Replace the valve.

Related

How do you replace valve seals?

  • How to replace valve seals on your engine. These may be stuck to the valve spring retainer and a little bump with the palm of your hand or a small hammer will jar it loose. Pack towels around the area so you won't lose the keepers into the engine. Remove the spring. Remove the old valve seal with pliers or screwdrivers and replace with a new seal.

Related

How do you replace a valve cover gasket?

  • Turn the valve cover upside down to expose the gasket, then pull the gasket off the cover. Apply a single bead of gasket sealant around the lip of the valve cover, then position the replacement gasket onto the sealant.

Related

How do you replace a gate valve on a sillcock?How do you replace a gate valve on a sillcock?

Remove sillcock handle, and loosen retaining nut with channel-type pliers. Remove stem. Replace O-ring found on retaining nut or stem. Remove the brass stem screw at the end of the stem, and replace the washer. Reassemble the sillcock. Gate valve has a movable brass wedge, or “gate,” that screws up and down to control water flow.

Related

How do you replace an anti siphon valve on a Woodford sillcock?How do you replace an anti siphon valve on a Woodford sillcock?

The replacement anti-siphon valve parts look different but they work just fine in older Woodford Model 17 sillcocks. First put the smaller valve component into the underside of the clear plastic cap so that the washer is up inside the cap, not down towards the faucet body.

Related

How do you fix a waterlogged sillcock?How do you fix a waterlogged sillcock?

Disconnect all garden hoses, and open the sillcock to let trapped water drain out. A special frost-proof sillcock has a long stem that reaches at least 6″ inside the house to protect it from cold. Install a sillcock so the pipe angles downward from the shutoff valve. This allows water to drain away each time the faucet is turned off.

Related

How do you install a sillcock on a kitchen faucet?How do you install a sillcock on a kitchen faucet?

Install a sillcock so the pipe angles downward from the shutoff valve. This allows water to drain away each time the faucet is turned off. Remove sillcock handle, and loosen retaining nut with channel-type pliers.

Related

How much does it cost to have a hose bib installed?

To do a basic hose bibb replacement yourself, the total cost will be $20 to $50, depending on the type of bibb you install. For a professional installation, you'll also need to pay labor costs. Assuming there's no pipe damage, installing a new hose bibb costs $120 to $300 on average.Feb 22, 2021

Related

Why does my hose valve leak?

Outside spigots leaking are typically caused by a malfunction, that arises over time or is due to damage of some sort. Causes of outside spigots leaking include: Loose packing nut. Worn-out washers in the spigot assemblies.

Related

What is a Sillcock valve?

A sillcock (or hose bib) is an outdoor water faucet that is located and attached to the exterior of a house. ... In simple terms, they are really a glorified outdoor water valve that brings you the same potable water you would get from your kitchen and bathrooms.Sep 6, 2018

Related

How do I Stop my sillcock from leaking water?

  • Look for a valve inside the house or basement near the leaking sillcock to turn off the water. If no valve is located, turn off the supply at the water main leading into the home. Remove the bonnet-collar nut that holds the stem in place. Turn the handle counter-clockwise to remove the stem from the unit.

Related

What is a frost proof sillcock faucet?

  • A frost-proof sillcock faucet (hose spigot) is an excellent choice in climates with freezing winter temperatures, since the faucet's design prevents water from remaining inside the faucet near the exterior wall, where it can freeze and split the faucet body.

Related

Why is my anti siphon faucet leaking?

  • Leaking From Anti-Syphon Fitting. Another place a frost-proof faucet can leak is from the anti-siphon portion of the valve if the faucet has one. This component can go bad with use, and to repair it you will most likely need a new anti-siphon rebuild kit that is brand-specific to your faucet.

Related

How do you fix a leaky faucet that won't turn off?

  • Shut off the water to the faucet, either at an indoor shutoff valve or by turning off water to the entire house. Remove the handle from the spigot by removing the handle screw. Unscrew the faucet mounting nut, and extract the entire stem from the faucet body.

Share this Post: