Blog

What is cellulose foam?

Which is better insulation fiberglass or cellulose?

At 3.5 per inch of material, the R-value of blown-in cellulose is 23% better per inch than fiberglass batts! According to research done at the Oak Ridge National Lab, fiberglass loses up to 50% of its R-value in very cold conditions; making cellulose a better choice for homes in northern climates.May 21, 2019

What are the disadvantages of cellulose insulation?

Disadvantages. Installation costs for cellulose can be higher than for fiberglass. Cellulose insulation creates an enormous amount of dust when it is installed, so a certified breathing mask is absolutely essential. Dry-blown cellulose sags and settles, reducing its R-value over time.

How long will Cellulose Insulation last?

Cellulose Insulation

The typical lifespan is 20 to 30 years, with degradation beginning as early as 15 years after installation. As with other types of insulation, severe weather or outside interference can reduce the lifespan.
Jan 21, 2019

Is cellulose insulation healthy?

Along with being made from a high amount of recycled materials, cellulose insulation has additional eco-friendly benefits. By reusing materials like newspaper, cellulose insulation prevents them from sitting in landfills and producing harmful greenhouse gases as they decompose.

Related

Which foam board insulation is best?

Extruded polystyrene (XPS), also known as blueboard, acts as the best insulating foam board for below-grade applications, according to the U.S. Green Building Council. XPS offers greater moisture resistance than EPS, without the need for special films or coating to fend off moisture.

Related

Do mice like cellulose insulation?

The insulation has a low toxicity to mammals such as mice that filter out the poison through their livers, Ansley says. But because the cellulose insulation is loose and falls in on itself, rodents don't like it and will often leave because they prefer areas where they can burrow in order to nest.Jan 11, 2016

Related

Does cellulose insulation lose R-value?

As a loose-fill insulation, cellulose provides high insulating values, represented by its higher R-value, and it creates a good barrier against air leaks and infiltration. However, like other loose fill insulation, it also has a tendency to settle over time, reducing its R-value and its ability to prevent air movement.Jan 3, 2018

Related

Should I remove old cellulose insulation?

Your insulation needs to be removed along with the droppings, as it'll carry some of its toxicity if left in your attic. Removing old insulation and replacing it with new ones will not only rid your home from any rodent infestation and mold, but also improve its energy efficiency and overall air quality.Nov 23, 2020

Related

Should I spray foam my attic?

That's because open-cell spray foam can transmit air and moisture. Closed-cell spray foam is a better choice for keeping subfloor moisture at optimal levels, while open-cell spray foam is a better choice for walls and attics, because it allows homes to “breathe,” Yates said.Dec 4, 2019

Related

Why cellulose insulation is bad?

Some healthy house proponents argue that the chemicals found in the insulation and the cellulose fibers themselves are harmful and potentially even carcinogenic. Let's take a look at these chemicals. Cellulose insulation is typically about 20% fire-retardant chemicals by weight.Sep 1, 1993

Related

Is cellulose insulation messy?

Cellulose insulation can create a huge mess.

Electrical sockets or any other openings in the wall allow the insulation to spill out – and if you have a ducted furnace system it will recirculate dust through your home.
Jul 23, 2019

Related

Does cellulose insulation get mold?

Mold rarely grows in cellulose insulation without direct water damage because of boric acid used as a fire retardant in the material. Boric acid is a natural mold preventer that is very effective at preventing mold growth.Jun 8, 2019

Related

Does blown in cellulose insulation settle?

Cellulose insulation, unfortunately, is most likely to settle. Over time, the aeration in cellulose insulation will decrease. This settling will cause cellulose insulation to lose up to 20 percent of its R-value. ... By blowing in about 20 percent more insulation, you can account for settling.Aug 22, 2019

Related

What type of insulation lasts the longest?

Cellulose insulation usually lasts 20 to 30 years before it starts to degrade, and mineral wool also lasts decades as long as it is not damaged. Spray foam insulation is one of the longest-lasting.Aug 3, 2020

Related

What are the problems with spray foam insulation?

  • Evidence suggests that spray polyurethane foam insulation poses a number of serious health risks, potentially causing respiratory and breathing problems, skin irritation and neurological issues.

Related

What is the difference between foam insulation and cellulose?

  • Difference Between. Spray Foam Insulation & Cellulose. Closed-cell polyurethane spray foam insulation is a much more dense type of foam than open cell. It has a smaller, more compact cell structure. It is a very good air barrier as well as a water vapor barrier.

Related

Why to use cellulose insulation?

  • Yet another reason why use cellulose insulation. Cellulose controls sound. Not only is cellulose a great product for insulating your home, shop or barn attic, its also great at reducing sound. STC is a number rating of a material’s ability to resist airborne sound transfer.

Related

Is fiberglass insulation better than cellulose?

  • Here's why: Cellulose insulates better than fiberglass, especially in very cold weather. It slows air flow better than fiberglass. It's cheaper than fiberglass. It's made from mostly recycled materials. A test house burned more slowly with cellulose installed than with fiberglass.

Related

What is the difference between cellulose and spray foam insulation?What is the difference between cellulose and spray foam insulation?

The R-value of cellulose insulation ranges from 3.6-3.8 per inch and spray foam insulation ranges from 3.5-3.7 per inch of insulation. Given that both insulators are equal in R-value, the difference in thermal resistance relies heavily on proper installation and air sealing.

Related

Is cellulose insulation a fire hazard?Is cellulose insulation a fire hazard?

These added chemicals add fire-resistance but does not completely eliminate the fire hazard. If cellulose insulation absorbs water, the chemical fire treatment will be destroyed. When weighing safety, cellulose insulation is a much safer option for you and your home compared to spray foam.

Related

Is cellulose insulation better for soundproofing?Is cellulose insulation better for soundproofing?

When comparing the ability to control sound, cellulose insulation offers superior soundproofing compared to spray foam insulation. Using cellulose insulation can absorb sound from outside your home and between rooms when added to your interior walls.

Related

What is the R-value of spray foam insulation?What is the R-value of spray foam insulation?

Spray foam insulation is sprayed into the walls of your home until it completely fills the entire space, no matter the shape of the area. Spray foam comes in two varieties; open-cell which has an R-value of 3.2 per inch and closed-cell which has an R-value of 6 per inch.

Related

Is cellulose insulation good for walls?

When done right, dense-packed cellulose is a highly efficient option for insulating exterior walls. It insulates as well if not better than the average batt (R3. 5-3.8/inch), and slows air flow through walls making your house cheaper and easier to heat and cool.Jun 9, 2014

Related

How long does cellulose insulation last?

Some studies have even shown that cellulose insulation can help to protect your home in a fire. Because it is made primarily of recycled materials, however, cellulose insulation does degrade over time. The typical lifespan is 20 to 30 years, with degradation beginning as early as 15 years after installation.Jan 21, 2019

Related

What is cellulose fiber used for?

The main applications of cellulose fibers are in the textile industry, as chemical filters, and as fiber-reinforcement composites, due to their similar properties to engineered fibers, being another option for biocomposites and polymer composites.

Related

What are the dangers of cellulose insulation?

Allergens. Blown-in cellulose insulation poses a unique hazard to individuals who are allergic to newspaper ink and chemical fire retardants. Boron chemicals, such as borax and boric acid, further aggravate matters and cause a host of respiratory problems in the elderly and infants.

Related

Do mice like blown-in cellulose insulation?

The insulation has a low toxicity to mammals such as mice that filter out the poison through their livers, Ansley says. But because the cellulose insulation is loose and falls in on itself, rodents don't like it and will often leave because they prefer areas where they can burrow in order to nest.Jan 11, 2016

Related

What is the difference between pink and blue foam board?

Main Difference Between Pink And Blue Foam Boards

Both are manufactured using the same process and contain similar chemical components. ... However, blue foam boards are manufactured by Dow Chemical Co. whereas the pink foam boards are manufactured by Owens Corning company.

Related

How thick should foam board insulation be?

It comes in standard-size 4×8 sheets, and smaller sizes, in many different thicknesses from 1/4 inch to 2 inches. Some types of thicker foam board insulation are available, but they may need to be special ordered.Jan 7, 2019

Related

What is the R-value of 2 inch foam board?

A wall utilizing STYROFOAM T-MASS Technology with a 2-inch exterior layer and a 4-inch interior layer of concrete along with a 2-inch layer of STYROFOAM extruded polystyrene insulation would result in a material R-value of approximately 11.33.

Related

Is cellulose insulation heavy?

Cellulose insulation is heavy, and compacts any underlying insulation. Because cellulose insulation is paper, it absorbs moisture when it rains, and in areas of high humidity. Cellulose insulation degrades over time and has to be replaced. Cellulose insulation promotes the growth of mold & mildew in your attic.Mar 15, 2021

Share this Post: