Blog

What are pulley curtains called?

How do you fix a pulley on a curtain?

Unscrew the brackets that hold the rod in place and take the rod down. Pull the cord from the rod, cutting it free from any tangles. Place the rod with the hardware facing up and feed the new cord under the top pulley on the left end of the rod. Maneuver the new cord into the rod's track and through the opening.

How does a traverse curtain rod work?

How do Traverse Curtain Rods Work? These mechanical rods operate by using small clips that move along a track that is embedded in the rod itself. This allows the curtain or drape to move smoothly along the rod and prevents any snagging that may happen with traditional curtain rods.Sep 3, 2019

What is a curtain rod pocket?

The most classic and common of all methods of hanging curtains, a rod pocket is a sewn-in pocket, or casing, at the top of a curtain panel that easily slips over a rod and conceals it. Curtain panels hung this way bunch nicely and have a simple, casual look. ... Rod Pockets work well with layered window coverings.May 6, 2019

What is the difference between curtains and panels?

The difference between curtains and window panels is one of semantics. A panel is a length of fabric, hemmed at the bottom, that hangs in front of a window. ... "Curtains" is a broad term that covers drapes, cafes and other fabric window treatments.

image-What are pulley curtains called?
image-What are pulley curtains called?
Related

How are traverse rods measured?

Standard traverse rods are only used for pleated draperies. Measure the width of the rod from end to end, this is the face width or rod width. At the ends of the rod, measure the distance from the front of the rod to the wall, this is the return.

Related

What are traverse rods?

Traverse rods have clips or eyes that move along a track embedded in a slot in the rod. The eyes have a small opening for the curtain pins and they'll run evenly across the rod, with the number of eyes dependent on how long the rod is. A cord runs through the rod, too, and is attached to a master slide or pulley.

Related

How does a curtain pulley system work?

  • How does curtain pulley system work? A typical center-draw traverse rod pulley system operates with four pulleys and a draw cord that opens or closes the drapes -- two pulleys are at each corner. They slide freely, pulled behind the master carrier from the center to the sides, carrying the drapes along the rod.

Related

How do you install a curtain rod pulley?

  • Install a single stationary pulley on the left end of the curtain rod. Ensure that the top of the cord path through the pulley is level with the center of the eye screws on the wooden rings. Install a double stationary pulley on the right end of the curtain rod. Shim the pulleys if necessary.

Related

How do you use a traverse rod pulley?

  • A typical center-draw traverse rod pulley system operates with four pulleys and a draw cord that opens or closes the drapes -- two pulleys are at each corner. They slide freely, pulled behind the master carrier from the center to the sides, carrying the drapes along the rod.

Related

Can Pleat curtains be hung from track or pole?

  • Pencil pleat curtains can be hung from a track or a pole. Tab top and Eyelet curtains must be hung from a pole. Pinch and Goblet pleat curtains can be hung from a track or pole but as they hang underneath either, to enable the curtains to concertina back properly, the track or pole will be in full view.

Related

How do you install a curtain rod pulley?How do you install a curtain rod pulley?

Install a single stationary pulley on the left end of the curtain rod. Ensure that the top of the cord path through the pulley is level with the center of the eye screws on the wooden rings. Install a double stationary pulley on the right end of the curtain rod. Shim the pulleys if necessary.

Related

How does a curtain pulley system work?How does a curtain pulley system work?

How does curtain pulley system work? A typical center-draw traverse rod pulley system operates with four pulleys and a draw cord that opens or closes the drapes -- two pulleys are at each corner. They slide freely, pulled behind the master carrier from the center to the sides, carrying the drapes along the rod.

Related

What is a center-draw traverse rod pulley system?What is a center-draw traverse rod pulley system?

A typical center-draw traverse rod pulley system operates with four pulleys and a draw cord that opens or closes the drapes -- two pulleys are at each corner. Each end of the cord is fastened to a master carrier; the two master carriers meet at the center of the rod. Additional carriers slide in a track inside the rod.

Related

How many pulleys are in a drapery stack?How many pulleys are in a drapery stack?

Drapery Stacks. A typical center-draw traverse rod pulley system operates with four pulleys and a draw cord that opens or closes the drapes -- two pulleys are at each corner. Each end of the cord is fastened to a master carrier; the two master carriers meet at the center of the rod. Additional carriers slide in a track inside the rod.

Share this Post: