Blog

Is a 45cc chainsaw powerful?

10 Best Automatic Chainsaw Handpicked for You in 2021

  • Timber Tuff CS-BAS Automatic Chainsaw Chain Sharpener, Grey.
  • Casulo 62cc 2-Cycle Gas Powered Chainsaw, 20Inch Professional Gas Powered Chain Saw with Automatic Oiler, Handed
  • Sun Joe SWJ800E 8-Inch -Amp Telescoping Electric Pole Chain Saw with Automatic Chain Lubrication System.

How many horsepower is 52cc chainsaw?

XtremepowerUS 52cc Gas Chainsaw 2.7HP Engine 2-Stroke Wood Cutting Tree Log Cutter Trimmer Crankcase EPA.

Is a 45cc chainsaw powerful?

A large, powerful professional chainsaw like this would be needed for regular, rigorous tasks, in large premises, like woodland or big estates. These would be suitable for felling trees, cutting thick logs or carrying out a lot of heavy work. ... These chainsaws can be anything from around 40-45cc* up to 100cc and more.

Do you need a license for an electric chainsaw?

You don't need a license or to have training to buy or use a chainsaw. ... Safety should always come first when using a chainsaw, so you should have safety clothing and equipment, including a helmet, safety glasses, ear defenders and specialist chainsaw gloves and trousers, as well as steel toe-capped boots.

How does a chainsaw automatic oiler work?

Specially engineered chainsaw bar oil goes into the oil reservoir. ... As you throttle up, a worm drive engages the pump to send oil through a port that releases onto the bar. As the chain moves across the bar, it distributes the oil across the surface, reducing the friction and the heat that occurs when cutting.Aug 9, 2018

Related

What does 45cc mean?

It means it has and alum engine. 45cc Means the rating horsepower of the engine.

Related

What does CC mean chainsaw?

Power, measured by cubic centimeters (cc), differentiates chainsaw engines. A larger engine with 65 cc generates more power, which is useful when sawing through tough trees.

Related

How often do you need to sharpen a chainsaw?

You can mount your sharpener if you use your chainsaw throughout the year as it makes it easy to sharpen the tool and also helps to avoid accidents. In most cases, sharpening the chain should happen after ten times of being in use, while in other situations, you have to sharpen it after every session.

Related

Why does my chainsaw chain dull so quickly?

If your chain dulls quickly, then it could be a couple of things. Check your user's manual to ensure that you are using the right sized file for your chain. Alternatively, you could be applying too much pressure when you file. This will create cutting edges that are too thin and dull quickly.Oct 26, 2016

Related

How many times can you sharpen chainsaw chain?

To keep your saw cutting in a straight line, be a fanatic about filing each cutter with the same number of strokes and the same amount of pressure. Cutters can be sharpened up to 10 times or more before the chain needs replacing.

Related

Can I use a chainsaw without training?

By law, chainsaw operators must have received adequate training relevant to the type of work they undertake. They are also required to wear appropriate chainsaw protective clothing whenever they use a chainsaw.May 19, 2021

Related

Can you use a chainsaw on a ladder?

Never operate a chainsaw on a ladder, and never cut limbs that are higher than your shoulder. (If you're looking to cut something higher, consider an altogether different tool: a manual rope saw, often called a pocket chainsaw.)Aug 9, 2021

Related

What is the most common chainsaw injury?

The most common hazards associated with chainsaws are injuries caused by kickback, pushback, and pull-in. Kickback is the most common and poses the greatest hazard. Kickback occurs when the rotating chain is stopped suddenly by contact with a more solid area throwing the saw rapidly backward toward the operator.

Related

Do all chainsaws have automatic Oilers?

All chainsaws have either manual or automatic pumps that dispense oil evenly on the saw chain. The oil removes friction and help the chain slide easily around the bar.Apr 2, 2021

Related

Is it normal for a chainsaw to leak bar oil?

In all but very exceptional cases there is nothing wrong with the chainsaw and what appears to be an oil leak is simply oil that has sprayed from the chain as it rotates at high speed, draining from the saw body and guide bar.

Related

What CC is best for chainsaw?

Engine size is measured in cubic centimeters (cc) or cubic inches. In general, the bigger the number, the more powerful the engine. Most homeowners will do fine with a saw in the 32 cc to 45 cc range.

Related

How many cc should a chainsaw have?

A chain saw is measured by both the chain bar size and the engine displacement, or size. All types of chain saws used for home maintenance range between a 10-inch to 20-inch blades with engine powers between 30 cc (cubic centimeters) to 55 cc.Sep 8, 2009

Related

How many cylinders does a chainsaw have?

A chainsaw has two main parts: a saw blade built into a chain, wrapped around a long metal guide bar, and a small, one-cylinder gasoline (petrol) engine (sometimes an electric motor powered by a cord or battery pack).Apr 29, 2021

Related

How does a chainsaw chain oil system work?

  • Your saw’s bar and chain oil mechanism includes the oil reservoir, which can be seen through a window on the side of the saw’s body, and a pump inside the saw that works in tandem with the crankshaft gear to release chain oil any time the saw’s running. In fact, with clutch-driven oilers, oil is released only when the chain runs.

Related

What are the benefits of an automatic chain grinder?

  • On average, it leads to 9% faster harvest rate and 10% less fuel consumption. Markusson makes robust quality machines that are also adapted for work on site. It enables you to sharpen chains directly via 12V power source. When you are considering investing in an automatic chain grinder – please contact us for a discussion.

Related

Are automatic chain sharpeners worth the cost?

  • There’s a bit of a learning curve at first, since automatic chain sharpeners like the TEMco FP1000 operate differently from regular bench grinders or electric chain sharpeners. And yes, some automatic chain sharpeners are expensive.

Related

What is an automatic chainsaw sharpener and how does it work?What is an automatic chainsaw sharpener and how does it work?

But an automatic chainsaw sharpener will alternate between left and right cutters by itself, so the entire chain is done in one cycle (faster sharpening times). You don’t have to worry about “blue tooth”, i.e. overheating the cutters.

Related

How does a chainsaw chain oil system work?How does a chainsaw chain oil system work?

Your saw’s bar and chain oil mechanism includes the oil reservoir, which can be seen through a window on the side of the saw’s body, and a pump inside the saw that works in tandem with the crankshaft gear to release chain oil any time the saw’s running. In fact, with clutch-driven oilers, oil is released only when the chain runs.

Related

What are the benefits of an automatic chain grinder?What are the benefits of an automatic chain grinder?

On average, it leads to 9% faster harvest rate and 10% less fuel consumption. Markusson makes robust quality machines that are also adapted for work on site. It enables you to sharpen chains directly via 12V power source. When you are considering investing in an automatic chain grinder – please contact us for a discussion.

Related

Are automatic chain sharpeners worth the cost?Are automatic chain sharpeners worth the cost?

There’s a bit of a learning curve at first, since automatic chain sharpeners like the TEMco FP1000 operate differently from regular bench grinders or electric chain sharpeners. And yes, some automatic chain sharpeners are expensive.

Related

What is a powerful chainsaw?

The new STIHL MS 881 is the world's most powerful chainsaw in production today. ... This 121.6 cm3 powerhouse has an output of 6.4 kW/8.7hp and a huge 8.0 Nm of torque, all from a powerhead that weighs 9.9kg, or 12.7kg with the STIHL Rollomatic ES 75 cm/30” bar and STIHL . 404″ Rapid Super chain.

Related

What is the lightest most powerful chainsaw?

VIRGINIA BEACH, Va. – The durable STIHL MS 150 C-E is one of the lightest and smallest gasoline-powered chainsaws on the market today. Weighing in at only 6.1 pounds, the compact and ultra-lightweight 23.6 cc powerhead is designed for maneuverability.

Related

How many cc should a good chainsaw have?

Your work will determine the type of chainsaw you purchase. Heavy work: If the task requires long hours felling trees, consider a professional chainsaw powered with a 65 to 110 cc engine and a guide bar of 16 to 20 inches. Moderate work: Cutting logs for firewood only needs a 55 cc engine with a 16 inch guide bar.

Related

What chainsaw has the highest RPM?

The MS 400 C-M chainsaw has been designed with professional forestry and arb users in mind, offering STIHL's highest performance and highest max rpm (14,000 rpm) in the 60cc chainsaw category.Oct 24, 2019

Related

What size tree can a 14 inch chainsaw cut?

Felling medium trees – 16” to 18”

Cutting down medium size trees with a trunk of about 14″ to 16” will require a larger chainsaw of about 16″ to 18” to fell the tree in one easy pass.
Aug 4, 2021

Related

What chainsaw do professional loggers use?

The Stihl 500i is generally seen as the ultimate logging chainsaw. It is Stihl's top-of-the-line professional chainsaw and has been designed and built especially for the logging industry and professional arborists.Apr 12, 2021

Related

What does XP mean Husqvarna?

XP® stands for “Extra Performance.” Compared to the Husqvarna Professional series, XP® chainsaws are designed with more horsepower, a better power-to-weight ratio, faster acceleration, higher maximum rotations per minute (RPM) and a special power band optimized for skilled users.

Related

What is the advantage of a skip tooth chain?

A skip chain has fewer cutting teeth than a conventional chain which means it won't be dragging as many teeth through the wood you're cutting. Less drag on the chain means less power is needed to cut through the log. That means the motor on your saw runs faster which keeps it in a more efficient power curve.Nov 3, 2012

Share this Post: