Blog

How many tons do I need for a log splitter?

Why does log splitter lose power?

Losing Driving Force When Splitting Wood? ... Temperature could also be the culprit for loss of driving force, as hydraulic oil is more viscose in cold weather resulting in a weak response until the machine warms up. If it is not any of the above, then the log splitting machine may require a piston or pump replacement.Dec 17, 2019

What is a two way log splitter?

  • A two-way splitter receives a signal through its input end, then splits the signal through two outputs on the other side. It is used to split a cable connection between two different television sets. There are two types of two-way splitters: regular splitters, high-bandwidth splitters,...

What is a hydraulic log splitter?

  • A log splitter is a piece of machinery or equipment used for splitting firewood from softwood or hardwood logs that have been pre-cut into sections (rounds), usually by chainsaw or on a saw bench. Many log splitters consist of a hydraulic or electrical rod and piston assembly and these are often rated by the tons of force they can generate.

What is a manual log splitter?

  • Manual Log Splitter. A manual log splitter is the most traditional, old fashioned way to split your firewood. No gasoline engines, no PTO from a tractor, just your energy and hard work are used to split the wood. Although this may sound tiring, new technology has helped make splitting logs by hand much easier. Manual splitters are more compact,...

Related

How does a log splitter pump work?

  • In a typical log splitter, the operator places a log on the splitter, then shifts a directional valve to route fluid from the pump to the cap end of the hydraulic cylinder. The combined flow from both pumps extends the cylinder’s piston rapidly to reduce the time it takes to advance the wedge to the engage the log.

Related

How many tons do I need for a log splitter?

The thicker a log is, the more wood there is to force apart on either side of the grain. Logs that are larger in diameter need more pressure to split. That's why a 4-ton log splitter will work well for 6" branches, but a 24" tree trunk will require at least the force of a 20-ton splitter.

Related

Is it cheaper to build a log splitter?

As with many of these DIY log splitters, you might have to spend a little cash for the basic components, but when you consider that buying a log splitter can cost upwards of $1,000, constructing a machine such as this is still a very economical alternative.

Related

What is a kinetic log splitter?

In place of hydraulic pump systems, kinetic splitters use massive flywheels to convert energy from a motor or engine into a burst of force. That force drives a moveable rack and push plate into a log and pushes the log against the splitting wedge, breaking the wood apart.

Related

Do split wedges work?

If you're looking to split logs or big rounds of wood, splitting wedges are just as important as a good axe or maul. They make the splitting process easier and safer, and allow you to do more with what you have – namely, your own physical strength and your main splitting tool (an axe, maul, or even sledgehammer).Nov 12, 2020

Related

Are Black Diamond log splitters any good?

The horizontal mount was also serviceable, and the logs stayed in the track more readily when it was horizontal. Both splitting positions are good aspects of the Black Diamond; which position you prefer comes down to whether you can lift the logs you've cut to the horizontal position.

Related

How much wood can you split in a day?

Well yes you cut down and block out 5 cords a day with not much problem . However splitting it with just one person takes a tad bit longer than one day even with a hydraulic splitter . Hard wood like oak is right at 2 tons per cord . That's a lot of weight to be slinging in a day no matter how old you are for 5 cords .May 21, 2011

Related

What is a good size for a log splitter?

People who live in a regular neighbourhood with simple wood branches and small trees should get a splitter that's about four to seven tons. If you have massive green logs often (which is uncommon in most neighbourhoods), then you can get a 16-ton log splitter. Anything over that is too much, in most cases.

Related

Will a log splitter split green wood?

Green logs still have moisture in them, so they're harder to split than dry wood. You'll want more tonnage if you plan on splitting newly cut logs. How thick are the logs you need to split? As you can guess, the thicker the logs, the more tonnage you'll want.

Related

How much force does it take to split wood?

The species of the tree is a strong determinant of the pounds of force needed to split your logs. For example, an Oak tree log requires 1350 pounds of pressure to split, based solely on its level of hardness.

Related

What's the average price of a log splitter?

The average price for Gas Log Splitters ranges from $50 to $3,000.

Related

Is kinetic or hydraulic log splitter better?

The most obvious and biggest advantage to hydraulic log splitters, is that generally they are a lot more powerful, and can split larger logs then their kinetic counterparts. Hydraulic systems have an easier time getting through knotty woods, and will struggle far less on hard woods.

Related

What is the difference between a kinetic and hydraulic log splitter?

A hydraulic splitter usually has a cycle time of 10-30 seconds. That is the time it takes to split one log and return to the ready position. A kinetic splitter comes in at 2-3 seconds per cycle. That's a massive difference in speed.

Related

What is the fastest log splitter?

This Hyper Split Fast Cycle log splitter by Tool Tuff Direct is one of the fastest hydraulic log splitters on the market today thanks to their new cylinder technology. Powered by a Ducar 6.5HP horizontal shaft engine. This proven engine has been tested in cold weather and high elevations.

Related

How to build a log splitter?

  • Log splitter plans! In order to build a log splitter,you should draw a proper plan for building. ...
  • Build a structure for holding splitter! Next step is the need of building a structure that can be easily transported and is capable of holding your log splitter ...
  • Begin building splitter! Now that the base is set and you have made all the necessary preparations,you are now good to begin building your log splitter.
  • Attach Hose with pump and valve! Once you have pump and valve at their appropriate places,activating the pump will drive high pressure of fuel to valve.
  • Trough for holding logs during the process of splitting! ...

Related

What is the best log splitter axe?

  • Gransfors Bruk Splitting Maul 31.5" Wood Splitting Axe. When you purchase an axe from Gransfors Bruk,you know that you're investing in a high-end,luxury tool that is as ...
  • Fiskars Super Splitting Axe 36". If you're on the hunt for a no BS,reliable axe,look no further than this highly rated 36 incher from Fiskars.
  • Lexivon v28 Splitting Axe. ...

Related

What type of wood splitter?

  • Quick Answer. Different types of wood splitters include mauls and hand-pump hydraulic, electrohydraulic or gas-engine hydraulic splitters. A maul is a hand-held tool that is used in conjunction with a chopping block. An experienced maul user is able to handle 20 to 30 10-inch diameter logs in an hour.

Related

How does a wood splitter work?

  • An electric log splitter (or a general wood splitter) works the same way a person would with an ax. A hydraulic pumping system is used to push the log into the blade, or it swings the blade at your log to split it- this depends on the design of your splitter.

Related

Are electric log splitters worth it?

Electric log splitters are typically priced a lot lower than a gas powered model due to the decreased amount of spitting capacity in which they provide. ... Another added benefit is that due to the lack of gas used to power the log splitter they do not release any fumes which makes them safe to use indoors as well.

Related

Who makes the most reliable log splitter?

Best Overall: NorthStar 24-Ton Horizontal/Vertical Log Splitter.Dec 13, 2021

Related

What size log can a 27 ton log splitter split?

This powerful machine handles logs up to 24 inches long, weighing up to 100 pounds. Twenty-seven tons of splitting capacity deliver the power you need.

Related

How do I know what size log splitter I need?

The size of a log splitter is determined by its tonnage. What is tonnage? Tonnage is the amount of force that the ram of a log splitter will exert as it splits a log. So to put it simply, the higher the tonnage the harder the ram will push on the log and the easier it will push through bigger logs.Jun 18, 2020

Related

Can you leave a log splitter outside?

Wood splitters are expensive and to safeguard the investment, it is always best to store it somewhere dry, such as a shed or garage. ... The answer is you can certainly leave a log splitter outside for as long as you want, provided the necessary precautions are taken.Jul 6, 2021

Related

What is better an electric or gas log splitter?

Gas splitters, like the Iron and Oak 30 ton wood splitter, usually pack a little more punch than an electric splitter, allowing you to take on bigger logs. While gas splitters are usually a little heavier than electric, you are not tethered by the needs of an outlet, giving yourself greater range and portability.Feb 10, 2020

Related

Are Yukon log splitters any good?

Fantastic, fuel efficient and quieter

Most people who use splitters I know, It is because they are beyond physical exertion because of bad shoulders or pain else where. Key start makes it very easy. Starts in seconds on cold winter days. Splits with ease at idle and used about a litre for a tonne of wood.
Jul 24, 2017

Related

Can you split logs with a chainsaw?

For most people, an 18-inch chainsaw is an ideal length for splitting firewood. For indoor fireplaces, you want a 16-inch pice of firewood when all is said and done. However, if you're starting with massive tree trunks, then you may want a 20 or 24-inch chainsaw to get through the thickness of that wood.Aug 10, 2021

Related

How long of a log can a log splitter split?How long of a log can a log splitter split?

The length of log depends more on the overall size of the splitter – most of the splitters we reviewed are designed to hold logs up to 20 inches long, although the Swisher splitter can accommodate logs as long as 25 inches. Logs longer than these maximum lengths will need to be cut down to size with an axe or chainsaw before splitting.

Related

Why does my log splitter keep turning off?Why does my log splitter keep turning off?

The splitter turns off automatically when overpressured in order to protect the seals and prevent hydraulic fluid from leaking. Users found that the splitting action on this splitter worked relatively well for most logs, but was sub-optimal when loading logs that take up the entire 20.5-inch length of the cradle.

Related

What is the force rating of a log splitter?What is the force rating of a log splitter?

The higher the force rating, the greater the thickness or length of the rounds that can be split. The log splitter consists of all four major hydraulic components. Most log splitter models for home use have a rating around 10 tons, but professional hydraulic models may exert 30 tons of force or more.

Related

How do you split wood with an electric splitter?How do you split wood with an electric splitter?

The vast majority of electric log splitters are horizontal splitters, meaning that the cradle is oriented parallel to the ground. These splitters require that you lift the wood round you want to split from the ground onto the cradle, rather than bring the splitter to your wood.

Related

Is a 10 ton log splitter enough?

Electric log splitters typically have somewhere between 6 and 10 tons of driving force, which is enough to split logs up to around 12 inches in diameter.Dec 13, 2021

Related

What does the tons mean on a log splitter?

Tonnage is the amount of force that the ram of a log splitter will exert as it splits a log. So to put it simply, the higher the tonnage the harder the ram will push on the log and the easier it will push through bigger logs. Lower tonnage would equal less force.Jun 18, 2020

Related

What size log can a 7 ton log splitter split?

Champion's 7-ton log splitter features an integrated log cradle and low profile for easy loading. The 79cc engine easily powers through logs up to 19 inches in length and 50 lb. in weight.

Related

How much is a log splitter?

The lowest price is for a hydraulic log splitter that will cost you just $649.99, while their most expensive product is a high-end Deluxe hydraulic splitter that costs $1,999.99.Oct 24, 2019

Related

What size engine do I need for a log splitter?

If you are serious about making your own backyard log splitter, then you want to have, at a minimum, the following components to provide the right amount of force and power for basic splitting of averaged sized, seasoned logs: A 5 Horsepower engine. A two-stage hydraulic pump rated at a max of 3 gpm at 2,500 psi.Sep 19, 2019

Related

What determines the power of a log splitter?

The larger the diameter of the wood, the higher the tonnage needed. The greener the wood (not dried) the more tons of pressure that are required to split it compared to seasoned wood (dried). The harder or more dense the wood is, the higher the tonnage pressure required to split it.

Related

Who makes Southland log splitters?Who makes Southland log splitters?

The Southland Power Equipment company are owned by the larger corporation MAT Holdings Inc, who are a company who have a wide range of specialties. From the automotive industry to fencing and the important part, there outdoor power equipment aka log splitters.

Related

What is a wood splitter used for?What is a wood splitter used for?

A log splitter is a piece of machinery or equipment used for splitting firewood from softwood or hardwood logs that have been pre-cut into sections (rounds), usually by chainsaw or on a saw bench.

Related

What is a manual log splitter?What is a manual log splitter?

Manual Log Splitter. A manual log splitter is the most traditional, old fashioned way to split your firewood. No gasoline engines, no PTO from a tractor, just your energy and hard work are used to split the wood. Although this may sound tiring, new technology has helped make splitting logs by hand much easier. Manual splitters are more compact,...

Related

What is a wood splitter?What is a wood splitter?

A wood splitter, as its name implies, is used for splitting wood or logs. The split wood can be used in a variety of ways within the lumber and construction trade.

Related

How much HP does a log splitter need?

If you are serious about making your own backyard log splitter, then you want to have, at a minimum, the following components to provide the right amount of force and power for basic splitting of averaged sized, seasoned logs: A 5 Horsepower engine. A two-stage hydraulic pump rated at a max of 3 gpm at 2,500 psi.Sep 19, 2019

Related

Are electric log splitters any good?

Electric log splitters are typically priced a lot lower than a gas powered model due to the decreased amount of spitting capacity in which they provide. ... Another added benefit is that due to the lack of gas used to power the log splitter they do not release any fumes which makes them safe to use indoors as well.

Related

What are wood splitter wedges made of?

The splitting wedge can be used with a sledge hammer or splitting maul to easily split firewood into kindling. The splitting wedge is made of machined, ground and heat treated carbon steel to withstand rigorous use.

Related

What size hydraulic pump do I need for a log splitter?

If your log splitter has a 6-7 Horsepower engine, you should opt for a two-stage hydraulic pump (about 3000 PSI) with 11 GPM. To get more speed, the pump either needs more flow (GPM) or a smaller cylinder. Smaller cylinders don't require more power but will produce less force.

Related

How many horsepower does it take to run a hydraulic pump?

1 HP is required for each 1 GPM at 1500 PSI or any multiple of 1500 such as 3 GPM at 500 PSI, 2 GPM at 750 PSI, 1/2 GPM at 3000 PSI, etc. Another handy rule-of-thumb is that it takes about 5% of the pump maximum rated HP to drive the pump when unloaded and pressure is very low.

Related

Are there any free homemade log splitter projects?Are there any free homemade log splitter projects?

These DIY log splitter projects also involve using commercial materials with recycled materials to build well-engineered log splitters. Finally, you will get the free plans too to operate a log splitter using a tractor. Browse all these free homemade log splitter plans that are too creative to amaze all your senses. 1. Unicorn Homemade Log Splitter

Related

Can a hydraulic log splitter be used for firewood?Can a hydraulic log splitter be used for firewood?

When you need to cut and stack and a lot of firewood for winter use at home or to sell in a firewood business, this heavy duty hydraulic log splitter can get the job done quickly. This DIY machine can change large hardwood trees into piles of split wood that’s just the right size for a wood heater.

Related

Is there a DIY wood splitter with a horn?Is there a DIY wood splitter with a horn?

DIY Wood Splitter This well-working DIY wood splitter comes with a unicorn-like pointed horn and will just go straight through the wood logs tearing the logs into firewood. Use a perfect hydraulic pump and engine system to operate this wood splitter, will definitely make a great gift for wood heater users.

Related

Does a log splitter have a motor?Does a log splitter have a motor?

This homemade log splitter does not have a motor and is operated manually. These free plans will show you how to recycled old iron into a useful wood splitter. Even though it is operated by manpower, the design incorporates a heavy duty spring that does most of the work for you.

Related

Is a 24 ton log splitter enough?

How Large Are Your Logs? ... Logs that are larger in diameter need more pressure to split. That's why a 4-ton log splitter will work well for 6" branches, but a 24" tree trunk will require at least the force of a 20-ton splitter.

Related

Is a 25 ton log splitter enough?

You'll find gas log splitters with well over 30 tons of driving force, but 25 tons is about average. That's enough to split logs up to around 24 inches in diameter.Jan 20, 2022

Related

What is the RAM on a log splitter?

The ram stop is used to shorten the return distance of the log splitter.Aug 20, 2020

Related

What is the best log splitter?

  • WEN Lumberjack 56207 Log Splitter. Ever imagined quickly having 13,000 pounds of wood split into firewood. The WEN Lumberjack 56207 can make this happen – with efficiency and speed.
  • Southland Outdoor Log Splitter. This a 25-ton gas-powered log splitter that brandishes a 208cc Southland OHV engine. ...
  • Sun Joe LJ10M Log Splitter. If you are on the lookout for a product that wields raw power and efficiency,then this Sun Joe LJ10M is the hulk that ...
  • Champion Log Splitter. This 25-ton,full beam and towable model has an American-made powerful engine that affords it its name.
  • North Star Log Splitter. A 37-ton splitter with a 270cc Honda GX270 engine,the North Star can split in horizontal and vertical positions.
  • Boss Industrial ES7T20 Log Splitter. This advanced model makes this list because it goes a long way to make things convenient. ...
  • Powerhouse XM-580 Log Splitter. Rugged,functional,and efficient,the Powerhouse has a state of the art design and comes in a trio of solid colors – black,red,and ...

Related

What is a wood splitter used for?

  • A log splitter is a piece of machinery or equipment used for splitting firewood from softwood or hardwood logs that have been pre-cut into sections (rounds), usually by chainsaw or on a saw bench.

Related

What is the best gas log splitter?

  • The Champion Power Equipment 22-Ton Gas Powered Log Splitter (92210) is the top of line when it comes to gas powered log splitters. Featuring 22 tons of heavy duty, yet portable splitting capacity this model is capable of producing extreme power to cut through the toughest logs ranging up to 24 inches in length and weighing up to 100 pounds. The ...

Related

How to build a manual log splitter?

  • Step 1 – Weld the Blades Together. Weld the four blades together in a cross shape. Be sure to wear proper safety attire for this step,and complete it ...
  • Step 2 – Weld the Blades Into the Pipe.
  • Step 3 – Set up Your Hydraulic Pump.
  • Step 4 – Attach the Blade System to the Pump.

Share this Post: