Blog

How do you hang a towel rack on drywall?

If the towel bar is the right length you may be able to mount one, or both of the escutcheons, directly to the wall studs behind the drywall. Use 1 3/4-inch drywall screws to mount the anchor plates. No need to drill pilot holes, just position the plates and use a power screwdriver to drive the screws through the drywall into the wood studs.

What is the strongest drywall anchor?

Traditional metal toggle bolts are the strongest of the bunch, but they're not the simplest to install because they require drilling a hole that's approximately three times wider than the diameter of the bolt (necessary to insert the anchor).Oct 28, 2020

How high should towel bars be mounted?

Towel bars are normally mounted between 36 inches and 42 inches from the floor. I feel 36 inches is too low since bath sheet towels are longer than standard bath towels. If you use extra-large towels, you raise them to 48 inches or 52 inches.Jul 4, 2015

Can I use concrete anchors in drywall?

They're actually meant for solid walls like concrete. They *can* in certain circumstances be used for drywall but even the must robust plastic anchor can only hold around 10 pounds.Jan 26, 2020

What can you use instead of a towel bar?

Towel Hooks instead of a towel bar–Your bathroom will look so much better if you find great towel hooks like these from Pottery Barn verses the towel bar. If you want your bathroom to be functuional towel hooks are the way to go.Jul 22, 2013

image-How do you hang a towel rack on drywall?
image-How do you hang a towel rack on drywall?
Related

How do you measure a towel bar?

When you want to replace an existing towel bar, grab a tape measure and measure along the bar between the inside edges of the supports. Typically, this measurement will not be an even number of inches, so round up to find the size of replacement you need.Oct 7, 2020

Related

Can Command hooks hold towels?

Command™ Large Towel Hook allows you to keep towels or robes off the floor, and hung up neatly so that they can dry in between uses. The hook sticks to many surfaces, including glass, mirror, tile, fiberglass, wood and painted surfaces. ... Now you can organize towels, robes, loofahs, and any other bathroom accessory.

Related

Can you glue towel rack to wall?

Hold the towel rack on the wall where it will go and lightly mark the edges with a pencil. Apply construction-grade adhesive such as silicone caulk to the entire back of one end of the towel rack and firmly press against the wall to ensure a good seal.

Related

Can you put a towel bar in a shower?

Comfort of the Shower Area - A towel bar should not be installed in a shower if the towel bar size is in the way of your comfort or safety. A protruding shower bar can cause unintended injuries, and if it limits the space in the shower, comfort can be compromised.Feb 2, 2021

Related

How do you repair a towel bar?

  • To repair a loose or broken towel bar: Remove the old or broken towel bar from your wall. Use a cordless drill and make the existing holes in the wall larger so you can put in toggle bolts. Put the toggle bolts on the towel bar mounting hardware by sliding the screw into the mounting hole and threading the spring loaded piece onto the other side.

Related

How to install a towel bar?

  • Measure from end to end on the towel rack (ours is 19-1/2”). Then measure the desired height on the wall where the towel rack will hang.
  • Make two small vertical marks on the wall spaced apart the length of your towel bar (again,our marks are 19-1/2” apart).
  • Hold up the mounting plate and align the top hole with the "+" sign. Use a pencil to mark both bracket holes.
  • Hammer in the drywall anchors. (They're normally provided with the towel bar.) Secure the mounting plates to the wall using the provided screws.
  • Line the left side of the towel bar up with the mounting plate and push in towards the wall. ...

Related

What is the recommended height for a towel bar?

  • For a children's bathroom, the recommended height is 36 inches (3 feet) from the floor. Towel bars or rings placed above a toilet should be 21 to 28 inches from the top of the toilet. These recommended towel bar heights are based on the height of the average person.

Related

What is a towel rail?

  • TOWEL RAIL (noun) The noun TOWEL RAIL has 1 sense: 1. a horizontal bar a few inches from a wall for holding towels. Familiarity information: TOWEL RAIL used as a noun is very rare.

Related

How do you mount a towel bar to the wall?How do you mount a towel bar to the wall?

If the towel bar is the right length you may be able to mount one, or both of the escutcheons, directly to the wall studs behind the drywall. Use 1 3/4-inch drywall screws to mount the anchor plates. No need to drill pilot holes, just position the plates and use a power screwdriver to drive the screws through the drywall into the wood studs.

Related

Can you use drywall screws for towel bars?Can you use drywall screws for towel bars?

That is because drywall is made of gypsum plaster and is too soft to hold screws. If the towel bar is the right length you may be able to mount one, or both of the escutcheons, directly to the wall studs behind the drywall. Use 1 3/4-inch drywall screws to mount the anchor plates.

Related

What is the most difficult wall to fasten to a towel bar?What is the most difficult wall to fasten to a towel bar?

Drywall is a common wall material in modern homes and is one of the most difficult materials to securely fasten to a towel bar. That is because drywall is made of gypsum plaster and is too soft to hold screws.

Related

How do you attach a toggle switch to drywall?How do you attach a toggle switch to drywall?

As the toggle penetrates the drywall, a pivot bar opens out in the wall cavity. Position the anchor plate over the hole in the toggle flange and drive the retaining screw in place. As the screw twists into the toggle, it will pull the pivot bar tight against the backside of the drywall.

Share this Post: