Blog

How do I test the hardness of my pool water?

What should pool readings be?

The recommended level for swimming pool water is 80-120 ppm. When pool water is found to be low in alkalinity (below 80 ppm) it is recommended that this level be increased.

What do the colors mean on pool test strips?

These strips determine chemical levels of substances in your pool such as chlorine, bromine, pH, alkalinity, and cyanuric acid. ... Generally, darker colors will mean a higher presence and lighter will mean a lesser presence of the chemical.

How do I test the hardness of my pool water?

Total Hardness: To test your pool water's hardness, dip a test strip 18 inches below the water surface or as directed by the test strip manufacturer. Remove the strip and wait for the color to change and indicate the level of hardness. Ideal levels of water hardness rest between 200 and 400 ppm.Dec 20, 2017

How do you use HTH chlorine test drops?

Fill pH test cell to the line indicated, by scooping the water from at least 25cm below the water surface. Add Solution 3 drop by drop, swirling and comparing after each drop, until the desired pH of 7.2 is reached on the pH standard colours on the left. Keep count of the number of drops added.

image-How do I test the hardness of my pool water?
image-How do I test the hardness of my pool water?
Related

How do you read 6th HTH strips?

Simply dip the test strip 18" in the water for 2 minutes and in 20 seconds your results are ready to read. Compare the strip easily on the back of the bottle or even better TEXT a photo to HTH123 and get the results!

Related

How much HTH shock do I need for a 1000 gallon pool?

For example, HTH Super Shock! asks for one pound per 13,500 gallons. So for a 21-thousand gallon pool, you'd want to round up to two pounds of shock. Always round up to make sure your pool gets enough chlorine.

Related

How do I soften hard water in my pool?

If your swimming pool water is harder than 300 parts per million, it will need to be softened. In a few cases, all it takes to soften your pool's water is to add some fresh water. You will need to drain a couple inches of water from the pool and then refill it from your garden hose.Oct 21, 2016

Related

What if pool water is too hard?

Hard water can cause damage to your pool and result in white residue left on ladders, pool decks and other surfaces. This is known as "scaling" and is the result of calcium hardening on a surface. According to Pool Center, water balance is a term used to describe water that is neither scaling nor corrosive.Jul 6, 2016

Related

How much chlorine do I add to my pool?

If the water is clean and clear, then add about 3 oz of liquid chlorine per 1000 gallons of water – while the pool filter is running. This should give you a chlorine level of about 3 ppm.Nov 20, 2018

Related

How do you test for alkalinity with hth?

  • Record as ppm total alkalinity. See dosage chart on side of hth® alkalinity increaser or hth® pH decreaser for adjustment. Rinse and fill sample tube to 25 mL mark with water to be tested. Add 5 drops HARDNESS INDICATOR.

Related

Why choose HTH ® test strips?

  • THE EASY WAY TO TEST: Easy to use and accurate, HTH ® test strips allow you to quickly check and adjust the chemicals in your pool to keep water clear, clean, healthy and balanced.

Related

How do you measure the hardness of water?

  • The water will be red if hardness is present. Add the hardness titrant one drop at a time until the water turns from red to blue. Count the drops. Multiply the number of drops by 10 to determine the calcium hardness in parts per million. The ideal level is from 200 to 500 PPM.

Related

How do you test for hardness with a plastic cap?

  • Add five drops of the hardness test reagent. Place the plastic cap on the compartment and invert it to mix its contents. Observe the color of the mixture. The water will be red if hardness is present. Add the hardness titrant one drop at a time until the water turns from red to blue. Count the drops.

Related

Why choose HTH ® test strips?Why choose HTH ® test strips?

THE EASY WAY TO TEST: Easy to use and accurate, HTH ® test strips allow you to quickly check and adjust the chemicals in your pool to keep water clear, clean, healthy and balanced.

Related

What does the HTH 6 way test kit test for?What does the HTH 6 way test kit test for?

Quickly and easily test your indoor and outdoor swimming pool water with the HTH ® 6-Way Test Kit. This pool water test kit tests for total chlorine, bromine, pH, total alkalinity, total hardness and cyanuric acid (CYA). Best of all, this test kit for swimming pools works with chlorine, bromine, and saltwater pools.

Related

How do you test for alkalinity with hth?How do you test for alkalinity with hth?

Record as ppm total alkalinity. See dosage chart on side of hth® alkalinity increaser or hth® pH decreaser for adjustment. Rinse and fill sample tube to 25 mL mark with water to be tested. Add 5 drops HARDNESS INDICATOR.

Related

How do you test for hardness with a plastic cap?How do you test for hardness with a plastic cap?

Add five drops of the hardness test reagent. Place the plastic cap on the compartment and invert it to mix its contents. Observe the color of the mixture. The water will be red if hardness is present. Add the hardness titrant one drop at a time until the water turns from red to blue. Count the drops.

Share this Post: