Blog

How do I know what model Kohler shower valve I have?

How do I know what shower cartridge I have?

Easiest of all is when it says the brand name right on the faucet face. But you should also look at the bottom of the faucet, on the handles or on the round plate behind the handles. If you find a brand name, go to the manufacturer's website and call the contact number for assistance.Sep 7, 2018

Where is the model number on a shower valve?

Exact model numbers can be found on your box or on your instruction sheet. If unavailable, you may find the general family series number on the back of the spout (non pullout).Oct 7, 2020

How do you remove a Kohler shower diverter?

Unthread the knob from the end of the diverter button. Using a flat-blade screwdriver, hold the diverter stem in place while unthreading the diverter button. Unthread and remove the diverter button. Unthread and remove the diverter sleeve.

Are all shower valves the same?

Regardless of the shower trim kit style, the valve fixture basically does the same thing. ... Most shower rough-in valves have 4 ports. 2 inlets for the hot and cold water pipes, and two outlets, one for tub spout and one for showerhead.

Related

What are Kohler Genuine Parts?

  • KOHLER GENUINE PARTS are designed by KOHLER engineers to maintain original product performance and promote product longevity. LASCO KO-500520 1.58 ounces 1.5 x 2 x 2 inches

Related

How do I know what model Kohler shower valve I have?

To identify the model number of your shower valve, first remove the trim, or handle and decorative plate. This allows you to expose the valve for proper identification. For assistance with removing the trim, refer to "Identify and Remove Single-Control Bath and Shower Trim".

Related

Which shower valve do I have?

Check behind the shower handle at the center of the trim plate to find the manufacturer symbol or brand name. “K” is for Kohler, “M” for Moen while Price Pfister, Delta and American Standard have their full names on the faucet.

Related

Does Kohler have lifetime warranty?

*KOHLER Cast Iron kitchen sinks installed in North America carry a Lifetime Limited Warranty for as long as the original consumer purchaser owns his or her home. Kohler Co.Mar 26, 2016

Related

How do I know if I need a new shower valve?

The first issue to look for is if there are any leaks in the valve when you turn on the water. If there are drips, that's a good indication that you should think about replacing the valve. Because, not only are you wasting water, but water that leaks behind the wall can cause rot as well as mold and mildew growth.Mar 2, 2018

Related

How long should a shower valve last?

A properly installed shower valve should serve you well for a long time. Even if you live in an area with hard water that causes limescale build-up in your appliances, you can expect to have a shower valve work well for about four or five years.Aug 30, 2021

Related

What happens when a mixing valve fails?

Any mixing valve can allow a cross-over to occur should they become defective. A defective mixing valve will allow a cross-over of hot and cold water, even though there are no visible signs of trouble or leak. A plumbing cross-over can cause a complaint such as 'water not hot enough'.

Related

Are all shower valves universal?

Re: Are Tub/Shower Valves Interchangeable? First, you absolutely CANNOT mix manufacturers on trim and rough-in valves. In fact, even within one manufacturer, they have many valves and the trims are not interchangeable. Shower sets are not always sold as separate trim and rough.

Related

Are shower valve cartridges universal?

Cartridges aren't interchangeable among different faucets, so if you decide you need a replacement, you need to know its part number so you can order it from your plumbing supplier or online. That number is usually available on the manufacturer's website in the online version of the owner's manual for your faucet.

Related

How many types of shower valves are there?

In a nutshell, there are three different types of shower valves on the market: pressure balancing shower valve, thermostatic shower valve and diverter shower valve.

Related

Why is my shower mixer not mixing?

The usual suspects for this problem are a blocked shower head, kinked or damaged shower hose, or blocked inlet filters in the shower itself. It could also be due to faulty non-return valves. Permanently running either hot or cold.

Related

Can you adjust a mixing valve?

You can adjust the mixing valve to increase or decrease the maximum temperature. Honeywell recommends setting the mixing valve at a temperature no higher than 120 degrees Fahrenheit to prevent scalding.Sep 26, 2017

Related

Do shower mixing valves go bad?

If your problem wasn't the anti-scalding device, your shower mixing valve has most likely gone bad and is preventing hot water from mixing properly into your shower water. ... Sometimes, though these valves wear out, break, or are positioned incorrectly and that can cause uncomfortable shower temperatures.Oct 19, 2016

Related

How does a Kohler shower temperature regulator work?

  • Kohler shower temperature regulators feature a built-in adjustable stop that helps prevent scalds. The stop is set at a safe temperature, and physically prevents the shower handle from being turned beyond that setting. The accuracy of the setting depends on a constant hot-water temperature from the water heater.

Related

How do I identify my single control shower valve?

  • Single Control Bath/Shower Valve Identification To identify the model number of your shower valve, first remove the trim, or handle and decorative plate. This allows you to expose the valve for proper identification. For assistance with removing the trim, refer to "Identify and Remove Single-Control Bath and Shower Trim".

Related

How to fix a Kohler shower not engaging the hot water?

  • Be sure to lubricate all gaskets and press the GP500520 Shower Pressure Balancing Unit in firmly, otherwise the water may continue to flow out of the spout even though the lever is completely shut off. I hope this information is helpful. This combined with GP77759 was what I needed to fix a Kohler shower not wanting to engage the hot water.

Related

How does a Kohler shower temperature regulator work?How does a Kohler shower temperature regulator work?

Kohler shower temperature regulators feature a built-in adjustable stop that helps prevent scalds. The stop is set at a safe temperature, and physically prevents the shower handle from being turned beyond that setting. The accuracy of the setting depends on a constant hot-water temperature from the water heater.

Related

How do I identify my single control shower valve?How do I identify my single control shower valve?

Single Control Bath/Shower Valve Identification To identify the model number of your shower valve, first remove the trim, or handle and decorative plate. This allows you to expose the valve for proper identification. For assistance with removing the trim, refer to "Identify and Remove Single-Control Bath and Shower Trim".

Related

How to fix a Kohler shower not engaging the hot water?How to fix a Kohler shower not engaging the hot water?

Be sure to lubricate all gaskets and press the GP500520 Shower Pressure Balancing Unit in firmly, otherwise the water may continue to flow out of the spout even though the lever is completely shut off. I hope this information is helpful. This combined with GP77759 was what I needed to fix a Kohler shower not wanting to engage the hot water.

Related

Can you remove the restrictor on a new shower valve?Can you remove the restrictor on a new shower valve?

Some, if not all, of the new shower valves have restrictions built into them. You could remove the restrictor in the shower head only to be impeded by the restrictor in the valve. I believe the pair of Moens I purchased a while back are like this.

Related

How do I know if my faucet cartridge is bad?

Signs that a cartridge faucet needs repair are water dripping from the spout, difficulty in adjusting the water temperature, hot water entering cold water outlets like toilet supply lines and inadequately heated water at some faucets.Jan 7, 1990

Related

What are the different types of shower valves?

In a nutshell, there are three different types of shower valves on the market: pressure balancing shower valve, thermostatic shower valve and diverter shower valve.

Related

What kind of faucet do I need for a shower?

  • Some showers are set up for a single-handle configuration while others will fit a 3-handle tub and shower faucet. Once you find the right configuration for your bathroom, you can consider style, brand and more. At Lowe’s, we have a variety of finish options including chrome, nickel, bronze and stainless steel faucets.

Related

How do I contact Kohler's customer service?

  • Call 1-800-4KOHLER or Visit Us at Kohler.com. All prices are Manufacturer's Suggested List Price in U.S. dollars. The price you pay at your local supply outlet may be different than the Manufacturer's Suggested List Price. These prices supersede previous prices and are subject to change without notice.

Related

Does Lowe's sell shower faucets?

  • At Lowe’s, we have a variety of finish options including chrome, nickel, bronze and stainless steel faucets. Partial to a certain brand like KOHLER shower systems or GROHE shower systems?

Related

Why does my Kohler shower faucet leak?

Showerheads can experience residual water drips/leaks for up to 90 seconds after the valve is turned off. Changes in water pressure throughout the home may also cause water to drip or leak for a short period of time. ... Drip or leak continues: The issue could be an internal seal or tear. Replace the Mixer Cap and PBU kit.

Related

How do you know if your shower faucet is leaking?

One of the tell-tale signs of a water leak coming from a shower valve behind the wall is water stains. If you have an upstairs bathroom, you may notice dried water stains on the ceiling below the shower. When someone is showering, you might see water dripping from the ceiling.Apr 30, 2021

Related

How to fix a leaking Kohler shower valve?How to fix a leaking Kohler shower valve?

You won’t be able to fix the faucet with another brand’s replacement shower valve. Insert the new Kohler shower valve and tighten the screws. Then install the trim and replace the handle. That’s all you need to do to fix your leaking Kohler shower valve, or upgrade a malfunctioning shower that does not deliver enough hot water.

Related

How do you install a Kohler shower faucet?How do you install a Kohler shower faucet?

Installing Kohler Replacement Parts. When your replacement Kohler faucet parts arrive, begin the installation process by shutting off the main water line. Remove the handle, trim, plate and adapter (if present) from the shower valve. Then, with a screwdriver remove the screws securing the cartridges to the rest of the valve.

Related

How do you replace a Kohler faucet cartridge?How do you replace a Kohler faucet cartridge?

When your replacement Kohler faucet parts arrive, begin the installation process by shutting off the main water line. Remove the handle, trim, plate and adapter (if present) from the shower valve. Then, with a screwdriver remove the screws securing the cartridges to the rest of the valve.

Related

Why is my Kohler shower head dripping?Why is my Kohler shower head dripping?

If removing the head does not stop the dripping or if your shower head and/or bath spout are leaking, the issue likely lies in the shower valve. Many of Kohler's shower valves are notable for the cartridge system they use, which makes troubleshooting and servicing the valves an easier process.

Related

Are Kohler shower valves universal?

This new system is versatile and easy to install, with the same dependability you rely on when it comes to your KOHLER bath or shower. The Rite-Temp universal valve system. The next generation of shower valving. Fits every KOHLER Trim (Trim family may require adapter kit.)

Related

Are shower cartridges universal?

Cartridges aren't interchangeable among different faucets, so if you decide you need a replacement, you need to know its part number so you can order it from your plumbing supplier or online. That number is usually available on the manufacturer's website in the online version of the owner's manual for your faucet.

Related

Can you mix and match shower parts?

You can coordinate the same style and finish across all components, trim and fittings, as well as faucets and accessories, or you can mix and match.

Related

How do you repair a Kohler bathroom faucet?

  • To repair a Kohler faucet that leaks, replace the worn O-ring. It is possible to repair the O-ring at home, but you need to have a flat-head screwdriver, a 1/8-inch Allen wrench, channel pliers and a Kohler O-ring kit.

Related

How do you replace a shower valve?

  • Quick Answer. To replace a shower valve, remove the valve trim, then remove the old valve. Install the new valve by cleaning the pipes, removing the plastic cartridge from the valve, applying flux and inserting the pipes. Use a torch to solder the connections.

Related

How to replace a shower cartridge?

  • These instructions apply to the earliest models of single-handle shower valves. Follow manufacturer’s instructions for your specific style of valve.
  • Start by removing the handle of the shower. There’s usually a cover plate that can be pried off with a flathead screwdriver. ...
  • Remove the escutcheon plate by unscrewing it.
  • Look to see if there’s a water shutoff near the shower valve. If not,shut the water off at the main water supply line.
  • There’s a small clip holding the cartridge in the shower valve. Carefully pry that up.
  • Use a cartridge removal tool to carefully work the old cartridge back and forth until it can be safely removed from the wall. ...
  • Once the cartridge is loose,use a pair of pliers to carefully pull it out of the wall. Don’t force it out. ...
  • Put some grease on the replacement cartridge and carefully work it back into the valve.
  • Put the small clip back in to hold the new cartridge in place.
  • Add a bead of silicone and a foam bead around the back of the escutcheon plate to make a watertight seal.
  • Screw the cover plate and the shower handle back into place.
  • Turn the water back on.

Related

Where is the model number on a Kohler faucet?

  • The model number is printed on a tag that is attached to the cold water supply line of the faucet. The supply line is located below the sink, countertop, bath rim, or behind the bowl of a bidet. The model number, or part number, is typically preceded by "P/N.". In the image above, the model number is 6227-V3-AA.

Related

What cartridges are compatible with the Kohler gp500520?What cartridges are compatible with the Kohler gp500520?

GP800820 Rite-Temp Pressure-Balancing Unit Cartridge,Compatible with Kohler GP500520. . . . . In stock soon.

Related

How to identify coralais shower valves k-15700-k-na?How to identify coralais shower valves k-15700-k-na?

K-15700-K-NA or K-15701-K-NA Coralais Shower Valve K-15700-K-NA or K-15701-K-NA Identifying Characteristics: Black mixer cap has 2 screws located at 3 and 9 o'clock that screw the cap to the brass valve body. The square brass stem rotates clockwise to turn on.

Related

What is the replacement for brass cap on a valve?What is the replacement for brass cap on a valve?

Brass Cap is discontinued for the single-ribbed and three-ribbed valves. Three-ribbed brass cap can be replaced with plastic mixer cap GP77759. Writing on the trim may not match and depth of the valve must be considered to ensure trim is flush with finished wall.

Related

How can I tell what shower valve I have?

If you want to know how to identify the shower valve manufacturer, check behind the shower handle at the center of the trim plate for the manufacturer's symbol or brand name. You will see one of the following shower faucet logos: K: the manufacturer is Kohler. M: the manufacturer is Moen.

Related

How do I know if I have a single handle shower valve?

Assess the faucet and determine how many handles it has. If it has two handles, it is a double-handle faucet, which means that the hot and cold water pipes each connect to separate handles. If it has one handle, it is a single-handle faucet. If the faucet has three handles, it is a rare three-handle model.2 окт. 2020 г.

Related

Are shower valves interchangeable?

Re: Are Tub/Shower Valves Interchangeable? You cannot interchange different manufacturer's handles and spouts. In fact sometimes you cannot even interchange the same manufacturer's trim between their own models.

Related

How do I replace a Kohler toilet gasket?

  • To replace the flush valve seal on a Kohler toilet, start by using turning the water shut-off valve to the right to cut the supply to the toilet. Remove the lid from the top of the toilet tank, and drain the tank fully by holding the down the handle of the toilet until the tank is completely empty.

Related

How do you repair a shower diverter valve?

  • If there is a small hole or screw under the spout, cover the drain, and then use an Allen wrench , sometimes known as a hex key, to take the screw out. The cover on the drain catches the screw before it falls into the drain. Twist the spout while pulling it straight out off the supply pipe.

Related

What type of shower valve do I have?

  • Home Shower Valve. There are two types of shower valve: the pressure balancing valve and the thermostatic valves. These two shower valves are currently the accepted shower control system being used for any residential and commercial use. Shower is very essential part of every bathroom Shower valves 101.

Related

How do I know what kind of shower valve I have?

Assess the faucet and determine how many handles it has. If it has two handles, it is a double-handle faucet, which means that the hot and cold water pipes each connect to separate handles. If it has one handle, it is a single-handle faucet. If the faucet has three handles, it is a rare three-handle model.Oct 2, 2020

Related

How do you replace a Kohler flush valve?

  • To replace the flush valve seal on a Kohler toilet, start by using turning the water shut-off valve to the right to cut the supply to the toilet. Remove the lid from the top of the toilet tank, and drain the tank fully by holding the down the handle of the toilet until the tank is completely empty.

Related

Where is water shutoff valve in shower?

  • Turn of the water supply to the shower at the shut-off valve. The shower water shut-off valve is located on a pipe that leads to your bathroom, which can be found in the basement, behind an access panel on the wall near the bathroom, or in a utility closet.

Related

What is a Kohler shower?

  • Kohler Shower Faucets. DTV+ is Kohler's most advanced digital showering system. It brings water, music, steam, and light together for a true multi-sensory showering experience.

Share this Post: