Blog

How do I find my delta cartridge number?

How do I find my delta cartridge number?

The model number is on the packaging as well as the Installation instructions provided with your faucet.

How much does a delta cartridge cost?

Each replacement cartridge costs nearly $30. This reflects either inferior quality, inferior design, inferior workmanship, or inferior quality control -- or some combination of all four. Based on this experience I would avoid all Delta products in the future.

Are all faucet cartridges the same?

Most bathroom faucets that have two handles are cartridge-style faucets. Each faucet handle (hot and cold) has its own cartridge, a valve that turns with the handle to control the flow of water into the faucet spout. If you have a very old two-handle faucet, it may be a compression-type rather than a cartridge.Aug 11, 2021

Where do I find my faucet model number?

The model number is printed on a tag that is attached to the cold water supply line of the faucet. The supply line is located below the sink, countertop, bath rim, or behind the bowl of a bidet. The model number, or part number, is typically preceded by "P/N."

image-How do I find my delta cartridge number?
image-How do I find my delta cartridge number?
Related

What does the orange switch on a Delta cartridge do?

Answer: It is a limiter for the Hot. When looking at it with the switch above the stem, the switch all the way to the left allows the maximum of hot water through.

Related

Are Delta cartridges universal?

Although Delta valves are Universal, there is some confusion as they do offer several model numbers on their website. Typically the valve you want will be R10000-UNBX or R10000-UNWS. These are the most commonly used and work for 99% of people.

Related

Does Delta have lifetime warranty?

Delta® Non-Electronic Lifetime Faucet and Finish Limited Warranty. All parts and finishes of the Delta faucet are warranted to the original consumer purchaser to be free from defects in material and workmanship for as long as the original consumer purchaser owns their home.

Related

How do you install Delta Faucet?

  • The first step when installing a Delta kitchen faucet is to install the spout first. Thread the mounting screws into the mounting nut making sure they are only a few threads in. Put the foam gasket on the spout and push the spout through the desired hole in the sink.

Related

How do you tighten a Delta kitchen faucet?

  • Slide the tip of a flat-head screwdriver under the edge of the cap. Lift gently with the screwdriver to remove the cap from the faucet handle. Tighten the setscrew -- located under the cap -- clockwise to tighten the handle. Push the decorative cap over the opening when the handle is tight.

Related

How do you remove a Delta Faucet?

  • To remove a Delta faucet, you need a screwdriver, Allen wrench , medium-size pliers and a small pipe wrench. A Delta faucet is designed with an outer handle, a cartridge assembly and an inner sleeve to ease its removal. First, shut off the valves running to the faucet or close the main water valve.

Share this Post: